Yonkers, NY · Commercial Kitchen Repair
Traulsen Repair in Yonkers
Traulsen Commercial Equipment Specialists
Traulsen builds premium heavy-duty reach-in refrigerators and freezers, roll-in racks, and blast chillers for high-volume kitchens, hotels and institutions. These are the workhorses in serious Yonkers operations, and when a Traulsen box or blast chiller goes down it stalls production — we get them cold and compliant fast.
- STATUS
- Dispatch ready
- RESPONSE
- Same-day · 24/7
- RATING
- 4.9★ (915)
- WARRANTY
- 90-Day Parts & Labor Warranty
- COVERAGE
- Yonkers + Westchester
Serving Yonkers
Traulsen Commercial Equipment Specialists
The short answer
Traulsen Repair in Yonkers typically runs $250–$900 — the $95 diagnostic is credited toward the repair. Most jobs finish same-day with OEM-spec parts, backed by a 90-Day Parts & Labor Warranty, with 24/7 emergency dispatch. Call (914) 449-5646.
Traulsen equipment lives in the busiest, highest-stakes stations — bakery roll-ins, banquet prep, blast chilling cooked product for HACCP. A failure there doesn't just spoil food; it halts production and can break your food-safety compliance. We prioritize these calls, diagnose at both the controller and sealed-system level, and document temperatures and cycle results so your Yonkers operation stays running and inspection-ready.
Why Choose Us
- Controller-level (Intelli-Cool) and sealed-system diagnostics
- Blast-chiller and HACCP time/temperature troubleshooting
- OEM-spec compressors, fans, heaters and controllers
- Same-day and 24/7 emergency dispatch
- Temperature and cycle results documented for compliance
- 90-day parts & labor warranty
Maintenance Tips
- Keep condensers clean — heavy-duty units still fail when heat rejection is choked by grease
- Verify blast-chiller probe accuracy and cycle results against your HACCP targets
- Inspect freezer door heaters and gaskets so doors seal and don't ice up
- Log holding temperatures and blast-chill cycles for inspection records
- Address Intelli-Cool error codes promptly instead of clearing and ignoring them
- Keep sheet-pan racks and shelves from blocking evaporator airflow
Quick facts
| Service | Traulsen Repair |
|---|---|
| Turnaround | Same-day in most cases |
| Diagnostic | $95 — credited to the repair |
| Warranty | 90-Day Parts & Labor Warranty |
| Most common fault | Diagnosed on site |
| Serving | Yonkers, Mount Vernon, New Rochelle, White Plains & Westchester County |
What repairs cost
Straight pricing, no surprises.
These are typical all-in market ranges for parts and labor on commercial kitchen equipment across Yonkers and Westchester County. Your exact price is quoted on site after diagnosis — the $95 service call is credited toward the repair.
| Repair | Typical range |
|---|---|
| Diagnostic / service call | $95–$165 |
| Commercial reach-in / prep refrigeration repair | $250–$900 |
| Control board / electronics repair | $300–$950 |
Ranges are estimates for reference, not a quote. OEM-spec parts · 90-Day Parts & Labor Warranty.
How a call goes
One commercial specialist. Fast dispatch. Verified fix.
- 01
Call & dispatch
Reach a real person at (914) 449-5646 — most Yonkers jobs get a same-day slot, and emergencies get 24/7 priority dispatch.
- 02
Diagnose the fault
We test the actual failing part and system — sealed system, gas train, harvest cycle — not guess-and-swap.
- 03
Fix with OEM-spec parts
Common commercial parts ride on the truck, so most repairs finish in a single visit.
- 04
Verify & warranty
We verify temperatures and safety, back every repair with a 90-Day Parts & Labor Warranty, and leave you inspection-ready.
Answers
Frequently asked questions
Our Traulsen blast chiller won't reach its target temperature in the cycle time — is that a food-safety risk?
Yes, and it's the most important thing to fix fast. A blast chiller has to pull cooked product through the 135°F to 41°F danger zone quickly to satisfy HACCP. If it's timing out, the cause is usually a weak sealed system, a dirty condenser, an inaccurate product probe, or an overloaded cabinet. We test refrigeration capacity and probe accuracy and restore the rated pull-down so your logs stay defensible.
What does an Intelli-Cool error code on my Traulsen mean?
Intelli-Cool logs faults for sensors, defrost, and refrigeration performance. The code narrows the search but isn't the whole story — a defrost fault can be a heater, a termination thermostat, or a control issue. We read the controller, confirm the actual failed component, and repair it rather than clearing the code and hoping.
Can you get a down Traulsen reach-in cold the same day?
Most Yonkers calls get same-day service, and a warming box full of prepped product gets emergency priority. We carry common controllers, fan motors, gaskets and sealed-system components, so many Traulsen repairs finish on the first visit.
The freezer door on our Traulsen sweats and sticks — why?
That's typically a failed anti-condensate door heater plus a worn gasket, which lets humid air condense and freeze around the frame. We replace the heater and gasket and check the hinges so the door seals and releases cleanly, protecting both the load and the door frame.
Do you offer preventive maintenance for Traulsen equipment?
Yes. Scheduled condenser cleaning, gasket and door-heater inspection, probe verification, and temperature logging keep heavy-duty Traulsen units reliable and inspection-ready — far cheaper than an emergency call during service.
Verified reviews
Rated 4.9★ by Yonkers operators
915 verified reviews
“The banquet reach-in threw a sensor fault every time we rolled a rack of hot pans in, and the display would lock until somebody cycled the power. He checked the cabinet probe against his own, replaced it, then walked my crew through how much heat we were dumping on that coil at once.”
“Blast chiller kept timing out before the product reached target, which puts our cook-chill paperwork in question every time it happens. He found a lazy condenser fan and a product probe reading four degrees high, replaced both, then ran a fully loaded cycle with me standing there watching the clock.”
“Freezer door had frosted itself shut and the crew were prying at it with a sheet pan. Open frame heater, shredded sweep. Both replaced, closer adjusted. It opens clean every morning now.”
“Slicer was tearing prosciutto instead of cutting it and the guard would not seat. He trued and sharpened the blade, replaced the interlock switch, and would not hand it back to my counter staff until the guard latched the way it should.”
Across Yonkers, Mount Vernon, New Rochelle, White Plains and the wider Westchester County commercial corridors, Yonkers Commercial Appliance Repair is the team restaurants, bars and commercial kitchens call when a traulsen repair needs a true commercial specialist rather than a residential appliance tech. We diagnose the actual fault — not guess-and-swap — carry OEM-spec parts on the truck for most Yonkers visits, and back every repair with a 90-Day Parts & Labor Warranty. In a commercial kitchen, downtime is lost revenue and lost inventory, so we dispatch fast and verify temperatures and safety before we leave. Call (914) 449-5646 for same-day and 24/7 emergency service.
4.9★ · Yonkers & Westchester County · 24/7
Need Traulsen Repair in Yonkers?
Call (914) 449-5646 for same-day & 24/7 emergency service in Yonkers.